Converting your phone lines to Cellular has never been easier with Bongo’s P2C unit.
P2C1000
The Bongo Technologies P2C allows users to replace analog (copper) phone lines, also called POTS (plain old telephone service) or PSTN (public switched telephone network), with a cost competitive P2C unit and cellular voice plans. The P2C converts your fixed location landline devices to cellular enabled fixed or mobile implementations.
This product is sold through dealers. Please contact our representative to find a certified installer.
- Standard phone lines converted to cellular
- Uses existing equipment
- Monitoring options available
Installing a P2C is the easiest way to switch legacy equipment from traditional phone landlines to a 4G LTE cellular network. The existing phone line is connected directly to P2C. Simply unplug the telephone jack from its wall outlet and plug it into the P2C’s RJ11 socket. The included SIM card is pre-installed. North American carriers include: AT&T/FirstNet and Verizon. Bongo offers carrier voice plans in support of the LTE P2C. Equipment lease options are available to qualified customers. Contact Bongo for more information.
Features & Benefits
- Reliable Network
- P2C gets a signal when others can’t.
- Flexible
- Dual SIM supports all major cellular networks.
- Compliant
- ASME A17.1 Compliant; E-911 Compliant; ADA, AMSI, IBC Code
- 99.9% Compatibility
- No rip and replace necessary. P2C is a takeover
module that works with existing legacy equipment.
- No rip and replace necessary. P2C is a takeover
- Superior Power
- 48 volts powers existing devices with ease.
- Easy to Install
- Plug & play concept makes installation simple and streamlined. Installs in minutes!
- Profitable
- Our dealer program was designed to increase your overall sales and company profit.
Documentation
Specification & Product Brief
Technical Specification
Features
- Supports 4G network standards
- E-911 Compliant
- Line Voltage Management
- Line Seizure/Calling Party Control
- Conforms to IEEE C2-2012
- Network Elements Act-1996
- Wide operating temperature range
- Firmware upgrade support
- Rugged aluminum enclosure
- ASME A17.1 Compliant *When used with an ASME
- A17.1 Compliant Emergency Telephone System
Interfaces
Modem/Telephone: RJ11 FXS
Serial: USB Mini – user terminal interface for configuration and firmware upload.
Cellular Antenna: SMA
GPS Antenna: SMA; 3.3 V LNA bias voltage output.
Power Input: 7-15 Vdc; 22W with two input alternatives:
6mm DC power jack with 2mm center pin positive
5.08mm (0.200”) terminal header (accepts screw clamp and crimp connector type terminal blocks)
Environmental
Operating Temperature: -40° C to +60° C (-40° F to 140° F)
(Note: 6mm DC power jack is not specified for operation below -25°C)
Relative Humidity: 5% to 95% (non-condensing)
Approvals
- Regulatory Approvals:
- PTCRB FCC ID: R17LE910CxNF
- ISED Canada: 5131A-LE910CxNF
- UL: 62368-1: December 2021
- Carrier Approvals:
- AT&T/FirstNet
- Verizon
- Check with Bongo Technologies if you require any
specific carriers not identified.
- ASME A17.1 Compliant *When used with an ASME
- A17.1 Compliant Emergency Telephone System
- RoHS Compliant
Features
SLIC: Performs all BORSCHT functions
DTMF decoding
REN=1 at 100 ft. (30m)
Voice: VoLTE (4G) and Voice over cellular (3G fallback)
Cellular Connection: 4G (LTE) bands 2, 4, 5, 12, 13, 14, 66 and 71. Plus 3G (fallback) bands 2, 4 and 5.
SIM Card: Micro (3FF size) SIM Card
Mounting: Integrated mounting brackets
Pushbuttons: MODE and RESET
LEDs: Power, Status, Cellular Link, GPS and Signal Strength
Dimensions: (L x W x D) 6.0 in (152mm) x 5.2 in (132mm) x 1.2 in (30mm)
Weight: 13 oz (365 g)
Accessories
12x8x5” ABS Plastic Wall Mount Electrical Enclosure with Solid Cover NBF-32016
Perforated Plastic Back Panel for 12×8” Bud Electrical Enclosures
NBX-32916-PL
TalentCell Rechargeable
6000mAh DC 12V/5V USB D
YB120600-USB
RJ11 Screw Terminal 4P 4C Male to 4P Female
P2C Versions
P2C1000, Elevator
P2C1000S, LTE MIMO Antenna, Elevator
P2C 1001 Elevator
Common Solutions
Elevator Emergency Communication
Two-Way Emergency Communication
An elevator must have two-way emergency communication from the cabin to help keep people safe and comply with demanding US codes and regulations. When an elevator fails, emergency communication notifies an emergency responder and keeps two-way communication open with the elevator and the monitoring center.
Emergency Pool Phone
Code Compliant Outdoor and Pool Emergency Phone
Save money by cutting the landline to your existing swimming pool by replacing it with the P2C 4G LTE cellular solution. If you are looking at a new pool, save money by avoiding the trenching costs that landlines require and the monthly service costs.
Emergency Help Phone
Two-Way Emergency Communication
Help phones and areas of refuge must be reliable in any situation and allow for the proper incident response follow-up. You can count on the P2C 4G LTE cellular solution with dual SIMs and a battery backup to give you peace of mind.
